WP-112107-00

The QSC WP-112107-00 I/O Module is a versatile and powerful addition to Q-SYS Ecosystem, a renowned and widely adopted enterprise-grade system for managing and integrating various professional audio, video, and control systems. This I/O Module is specifically designed to provide a high-density digital input and output expansion for Q-SYS Core Processors, enabling system integrators and installers to handle a greater number of I/O requirements in various installations.

The WP-112107-00 I/O Module supports both digital AoIP (Audio over Internet Protocol) and analog I/O configurations. It comes equipped with 128 channels of AoIP, which can be configured for either 64 inputs or 64 outputs, and 16 channels of analog I/O, arranged as 8 balanced inputs and 8 balanced outputs. The AoIP channels can be utilized for various applications, such as microphones, line-level sources, or even as returns from Dante-enabled power amplifiers.

The I/O Module is housed in a compact, 1RU (Rack Unit) form factor, ensuring minimal rack space requirement while still providing a substantial increase in I/O capabilities. It features a robust, fanless design, ensuring reliable operation in various environments, including those with demanding temperature conditions.

The WP-112107-00 I/O Module is designed with ease of installation and integration in mind. It utilizes Q-SYS Config Software, enabling system designers and installers to configure and manage the I/O Module's settings, including gain settings, phantom power, and other critical parameters, from a single, intuitive interface. This not only streamlines the installation process but also ensures consistent and accurate system configuration.

The I/O Module is also equipped with an integrated Power over Ethernet Plus (PoE ) injector, allowing it to power connected devices, such as microphones and other PoE-compatible components, through the same Ethernet cable. This not only simplifies the cabling requirements but also reduces the overall number of components needed in the installation.

In summary, the QSC WP-112107-00 I/O Module is an essential component for any Q-SYS installation requiring a significant expansion of I/O capabilities. It offers a high-density AoIP and analog I/O expansion, compact form factor, and easy integration with the Q-SYS Config Software, ensuring a reliable, flexible, and efficient system solution.

The QSC WP-112107-00 is a 12-input, 8-output ANSI Type 1-compliant analog input/output (A/I/O) processing module designed for use with Q-SYS Ecosystem. Here are some potential pros and cons of buying this product for your Q-SYS installation:

1. Compatibility: The WP-112107-00 is specifically designed for use with the Q-SYS Ecosystem, making it a reliable and seamless choice for integrators and installers who are already using this platform.

2. Flexibility: With 12 inputs and 8 outputs, this module offers a good balance of I/O capacity for a variety of applications, from small to medium-sized installations.

3. ANSI Type 1 Compliance: This module is compliant with the American National Standards Institute (ANSI) Type 1 standard, which ensures interoperability with other ANSI Type 1 devices, making it easier to integrate with other systems and devices.

4. High-Quality Signal Processing: The WP-112107-00 offers high-quality signal processing, including automatic gain compensation and adjustable input impedance, ensuring accurate and reliable signal transfer.

1. Cost: Compared to other I/O processing modules in the market, the WP-112107-00 may be considered relatively expensive, especially for smaller installations where fewer I/O points may be required.

2. Limited Connectivity: Although the WP-112107-00 offers a good balance of I/O capacity, it does not offer any network connectivity or support for digital signals, which may be a limitation for some installations.

3. Size: The module is not the smallest in the market, so it may require additional rack space, which could be a concern for installations with limited space.

The QSC WP-112107-00 is a reliable and flexible choice for Q-SYS installations that require ANSI Type 1-compliant analog I/O processing. Its high-quality signal processing and compatibility with the Q-SYS Ecosystem make it an attractive option for integrators and installers. However, its relatively high cost, limited connectivity, and size may be drawbacks for some applications. Ultimately, the decision to purchase the WP-112107-00 depends on the specific requirements and budget of your installation.

If you are looking for an ANSI Type 1-compliant analog I/O processing module for your Q-SYS installation and have a moderate budget and a need for a good balance of I/O capacity, then the QSC WP-112107-00 is a solid choice. However, if you require more network connectivity, digital signals, or a smaller form factor, you may want to consider other options in the market. It's always a good idea to consult with a Q-SYS integrator or distributor to determine the best solution for your specific application.

Details:

Pulled from working units.

specifications audioproequip:

• brand: Qsc
• mpn: Wp-112107-00
• compatible brand: For Qsc
• type: I/o Pcb Board
• unit type: Unit
• compatible model: Q-sys I/o Frame
• country of origin: United States

seller audioproequip:

• rating: 100.0%
• city: arlington, virginia
• # reviews: 408

offer audioproequip:

• started: may 16, 2026
• prices: $199.99–$299.99
• item condition:
  • Used
  • New – Open box
• in stock #: 5
• best offers: true
• availability: in stock
• sold #: 12
• options: ship-to-home

payments audioproequip:

• other
• wallet: paypal
• credit card: discover

returns audioproequip:

• policy: no returns

general audioproequip:

• category: Musical Instruments > Pro Audio Equipment Parts

shipping audioproequip:

• transit: 5-10 days
• service: usps ground advantage
• type: calculated
• carrier: usps
• class: standard

Also Viewed:

• AD-MR8: RING SPEAKER, Qsc
• WP-212212-10: TOP COVER AMPLIFIER MODULE, Qsc
• PW-000108-02: SUPPLY, Qsc
• KW152: AMP MODULE SPEAKER, Qsc
• MS-000259-GP: WHEEL, Qsc
• CP-000033-00: DONGLE ADAPTER, Qsc
• WP-000958-00: FAN, Qsc
• MS-000138-GP: FAN, Qsc
• WP-002454-10: AMPLIFIER MODULE, Qsc
• WP-000980-TS: GRILLE, Qsc
• WP-000367-00: FAN SPEAKER, Qsc